| Model Specifications | FDT356S-SA |
| Engine | Type | In-line,water-cooling,swirl chamber |
| No.of Cylinder | 4 |
| Cylinder Bore | 85mm |
| Piston Stroke | 95mm |
| Displacement | 2.16L |
| Aspiration | Natural |
| Max. power | 25.7kw@2350rpm |
| Max. torque | 120Nm@1650rpm |
| Fuel | Diesel |
| Fuel consumption | ≤264g/kWh |
| Lubrication means | Full pressure by rotary pump |
| transmission | Clutch | Single dry disk diaphragm-spring clutch 10", pedal control |
| Gearbox | 2-shaft, sliding gear shift, 8fwd+2rev |
| Main drive | Spiral bevel gear |
| Final drive | Externally meshed spur gear |
| Brake and steering (interconnected) | steering clutch | Dry ceramic-metallic multi disk clutch |
| brakes | Brand brakes controlled by pedals |
| Undercarriage system | Undercarriage frame | Semi-rigid |
| Track rollers(each side) | 5+1 | |
| Tension device | Helical spring, adjusted by screw |
| Number of shoes | 40 (1pitch=109mm) | |
| Hydraulic blade and 3-point hitch system | Gear Pump | CBT-F314 |
| Rated capacity | 29.4 lpm(7.7gpm) (depend on the rotation speed of engine) |
| Rated pressure of relief valve | 16MPa(2230psi) |
| Control valve | 4-spool |
| Blade control | Lift: raise, hold, lower, float |
| Angle: right, hold, left |
| Tilt: right, hold, left |
| Blade lift cylinder bore X stroke / number | Double action 50mm X 285mm / 2 |
| Blade angle cylinder bore X stroke / number | Double action 63mm X 280mm / 2 |
| Blade tilt cylinder bore X stroke/ number | Double action 63mm X 50mm / 1 |
| Hitch control by 1 level | Raise, hold, lower(float) |
| Elevating cylinder boreXstroke /number | Single action 80mm X100mm / 1 |
| Lift capacity @hitch point | 7350N(1650lbs) |
| Lifting height at hitch point: | 720mm |
| Type of hitch | Rear 3-point, category I |
| Power take-off | Type | Mechanical, dependent |
| Two rotary speeds | 540rpm @engine 1812rpm |
| 1000rpm @engine 1772 rpm |
| Shaft diameter | 35mm(1 3/8"), 6 splines |
