CE and EPA Certified 35HP Multi-Purpose Track Dozer for Sale
1. Main Features :
Our 35HP Multi-purpose mini dozer is used in bulldozing, land leveling, snow grading, excavating, ditch clearance, etc, can be euipped with with 6 action blade, 4 in 1 loader, backhoe, ripper, mower, and other tractor implements driven by PTO.
2. Dimensions of Bulldozer
| Overall length(with blade or loader) (mm) |
2960 |
| Overall length (no blade or loader) (mm) |
1940 |
| Overall width(with straight blade or loader) (mm) |
1650 |
| Overall width (no blade or loader) (mm) |
1410 |
| Overall height to top of ROPS (mm) |
2285 |
| Ground contact length (mm) |
1100 |
| Track gauge (mm) |
1150 |
| Shoe width (mm) |
260 |
| Ground clearance (mm) |
240 |
| Operating weight (kg) |
2830 |
| Max. drawbar pull (kgf) |
2350 |
3. Six-action blade
| Height of blade (mm) |
675 |
| Lift height of blade (mm) |
500 |
| Max. digging depth of blade (mm) |
80 |
| Blade capacity |
0.67 m3 |
4. Performance
| Engine |
Type |
In-line,water-cooling,swirl chamber |
| No.of Cylinder |
4 |
| Cylinder Bore |
85mm |
| Piston Stroke |
95mm |
| Displacement |
2.16L |
| Aspiration |
Natural |
| Max. power |
25.7kw@2350rpm |
| Max. torque |
120Nm@1650rpm |
| Fuel |
Diesel |
| Fuel consumption |
≤264g/kWh |
| Lubrication means |
Full pressure by rotary pump |
| transmission |
Clutch |
Single dry disk diaphragm-spring clutch 10", pedal control |
| Gearbox |
2-shaft, sliding gear shift, 8fwd+2rev |
| Main drive |
Spiral bevel gear |
| Final drive |
Externally meshed spur gear |
| Brake and steering (interconnected) |
steering clutch |
Dry ceramic-metallic multi disk clutch |
| brakes |
Brand brakes controlled by pedals |
| Undercarriage system |
Undercarriage frame |
Semi-rigid |
| Track rollers(each side) |
5+1 |
|
| Tension device |
Helical spring, adjusted by screw |
| Number of shoes |
40 (1pitch=109mm) |
|
| Hydraulic blade and 3-point hitch system |
Gear Pump |
CBT-F314 |
| Rated capacity |
29.4 lpm(7.7gpm) (depend on the rotation speed of engine) |
| Rated pressure of relief valve |
16MPa(2230psi) |
| Control valve |
4-spool |
| Blade control |
Lift: raise, hold, lower, float |
| Angle: right, hold, left |
| Tilt: right, hold, left |
| Blade lift cylinder bore X stroke / number |
Double action 50mm X 285mm / 2 |
| Blade angle cylinder bore X stroke / number |
Double action 63mm X 280mm / 2 |
| Blade tilt cylinder bore X stroke/ number |
Double action 63mm X 50mm / 1 |
| Hitch control by 1 level |
Raise, hold, lower(float) |
| Elevating cylinder boreXstroke /number |
Single action 80mm X100mm / 1 |
| Lift capacity @hitch point |
7350N(1650lbs) |
| Lifting height at hitch point: |
720mm |
| Type of hitch |
Rear 3-point, category I |
| Power take-off |
Type |
Mechanical, dependent |
| Two rotary speeds |
540rpm @engine 1812rpm |
| 1000rpm @engine 1772 rpm |
| Shaft diameter |
35mm(1 3/8"), 6 splines |
We will guarantee that your request will be handled quickly and appropriately within 24 hrs.
The most competitive price in the logistics cost to save your cost.
Welcome to contact with me at any time.
Best Regards ,
Sally
__________________________________________________
Wuhan Fusen Machinery Co.,Ltd
Add: 1004, Longyue Bld, Guanggu 1st Road,Wuhan,China 430000
Mobile :+86 18971046640
Office tell : 0086-27- 59102535
Fax No.: 0086-27-59102535
Website: fusenmach.en.made-in-china.com
Audited Supplier 
){kind=link}