35HP Multi-purpose mini dozer for construction use
1. Main Features :
Our 35HP Multi-purpose mini dozer is used in bulldozing, land leveling, snow grading, excavating, ditch clearance, etc, can be euipped with with 6 action blade, 4 in 1 loader, backhoe, ripper, mower, and other tractor implements driven by PTO.
2. Dimensions of Bulldozer
| Overall length(with blade or loader) (mm) |
2960 |
| Overall length (no blade or loader) (mm) |
1940 |
| Overall width(with straight blade or loader) (mm) |
1650 |
| Overall width (no blade or loader) (mm) |
1410 |
| Overall height to top of ROPS (mm) |
2285 |
| Ground contact length (mm) |
1100 |
| Track gauge (mm) |
1150 |
| Shoe width (mm) |
260 |
| Ground clearance (mm) |
240 |
| Operating weight (kg) |
2830 |
| Max. drawbar pull (kgf) |
2350 |
3. Six-action blade
| Height of blade (mm) |
675 |
| Lift height of blade (mm) |
500 |
| Max. digging depth of blade (mm) |
80 |
| Blade capacity |
0.67 m3 |
4. Performance
| Engine |
Type |
In-line,water-cooling,swirl chamber |
| No.of Cylinder |
4 |
| Cylinder Bore |
85mm |
| Piston Stroke |
95mm |
| Displacement |
2.16L |
| Aspiration |
Natural |
| Max. power |
25.7kw@2350rpm |
| Max. torque |
120Nm@1650rpm |
| Fuel |
Diesel |
| Fuel consumption |
≤264g/kWh |
| Lubrication means |
Full pressure by rotary pump |
| transmission |
Clutch |
Single dry disk diaphragm-spring clutch 10", pedal control |
| Gearbox |
2-shaft, sliding gear shift, 8fwd+2rev |
| Main drive |
Spiral bevel gear |
| Final drive |
Externally meshed spur gear |
| Brake and steering (interconnected) |
steering clutch |
Dry ceramic-metallic multi disk clutch |
| brakes |
Brand brakes controlled by pedals |
| Undercarriage system |
Undercarriage frame |
Semi-rigid |
| Track rollers(each side) |
5+1 |
|
| Tension device |
Helical spring, adjusted by screw |
| Number of shoes |
40 (1pitch=109mm) |
|
| Hydraulic blade and 3-point hitch system |
Gear Pump |
CBT-F314 |
| Rated capacity |
29.4 lpm(7.7gpm) (depend on the rotation speed of engine) |
| Rated pressure of relief valve |
16MPa(2230psi) |
| Control valve |
4-spool |
| Blade control |
Lift: raise, hold, lower, float |
| Angle: right, hold, left |
| Tilt: right, hold, left |
| Blade lift cylinder bore X stroke / number |
Double action 50mm X 285mm / 2 |
| Blade angle cylinder bore X stroke / number |
Double action 63mm X 280mm / 2 |
| Blade tilt cylinder bore X stroke/ number |
Double action 63mm X 50mm / 1 |
| Hitch control by 1 level |
Raise, hold, lower(float) |
| Elevating cylinder boreXstroke /number |
Single action 80mm X100mm / 1 |
| Lift capacity @hitch point |
7350N(1650lbs) |
| Lifting height at hitch point: |
720mm |
| Type of hitch |
Rear 3-point, category I |
| Power take-off |
Type |
Mechanical, dependent |
| Two rotary speeds |
540rpm @engine 1812rpm |
| 1000rpm @engine 1772 rpm |
| Shaft diameter |
35mm(1 3/8"), 6 splines |
Audited Supplier 
){kind=link}