Backhoe Loader WZ30-25 with Cummins Engine
General Introduction:
Engine:Cummins 4BTA3.9-C110 82KW
Operating Weight: 7600kg;
Load Bucket Capacity: 1.0M3;
Digging Bucket Capacity:0.2 M3
Transmission and Axle: CARRARO
Wheel Drive: 4WD
Enclosed cabin
Technical Specification:
|
1 |
Length(with bucket on ground) |
7085(mm) |
2 |
Width |
2313(mm) |
3 |
Load Bucket width |
2313(mm) |
4 |
Height(To the top of the cab) |
2710 (mm) |
5 |
Height(To the top of the digging pole) |
3424 (mm) |
6 |
Wheelbase |
2155.5(mm) |
7 |
Back wheel Tread |
1700(mm) |
8 |
Fore wheel Tread |
1880(mm) |
9 |
Min. ground clearance |
275(mm) |
Main Loading Technical Specification |
1 |
Rated load |
1700(Kg) |
2 |
Operating weight |
7600KG |
3 |
Max lifting capability |
3400KG |
4 |
Rated load bucket capacity |
1.0(m3) |
5 |
Max. load breakout force |
>60kN |
6 |
Max. dump clearance |
2714(mm) |
7 |
Max. Dump reach |
845(mm) |
8 |
Dump angle at any position |
≥43.50 |
9 |
Min. turning radius |
|
(1) Outside of bucket |
5670(mm) |
(2) Center of front wheel |
4380(mm) |
10 |
Lifting time of loading bucket |
≤4.5(sec.) |
11 |
Lowering time of loading bucket |
≤3.5sec.) |
12 |
Dumping time |
≤1.5(sec.) |
13 |
Traveling speed(Km/h),4 forward and 4 reverse |
|
(1) gear forward |
6 |
(1)gear reverse |
6 |
(2) gear forward |
9.6 |
(2) gear reverse |
9.6 |
(3) gear forward |
20.5 |
(3) gear reverse |
20.5 |
(4) gear forward |
38 |
(4) gear reverse |
38 |
Main Digging Technical Specification |
1 |
Rated digging bucket capacity |
0.3(m3) |
2 |
Max. digging depth |
4405 |
3 |
Max. digging radius |
5481 |
4 |
Max. dumping height |
3737 |
5 |
Max. digging force |
>50+10%kN |
Diesel engine |
1 |
Model |
WD DEUTZ WP4G95E221 |
Cummins 4BTA3.9-C110 |
2 |
Type |
Direct injection. Turbocharged. Water cooling |
Direct injection. Turbocharged. Water cooling |
3 |
Rated output |
70 (kw) |
82(kw) |
4 |
Total exhaust of cylinder |
4.5(L) |
3.9(L) |
5 |
Inter-bore of cylinder/stroke |
102/130(mm) |
102/120(mm) |
6 |
Voltage of starting motor |
12(V) |
12(V) |
7 |
Rated speed |
2200(r/min) |
2200(r/min) |
8 |
Max. Torque |
380(N.M) |
460(N.M) |
9 |
Starting type |
Electric |
Electric |
10 |
Min. specific fuel consumption |
216(g/Kw.h) |
207(g/Kw.h) |
Transmission System |
Torque Converter |
1 |
Model |
CARRARO |
2 |
Cooling type |
Pressure oil circulating |
Transmission case |
1 |
Model |
CARRARO |
2 |
Type |
Synchromesh mechanical shift |
3 |
Gear shift position |
4 Forward and 4 reverse gears |
Axle and Tire |
1 |
Model |
CARRARO |
2 |
Type of main reducer |
spiral bevel gear, single stage |
3 |
Type of final reducer |
Single stage planetary |
4 |
Max. traction force |
70kN(4WD) |
5 |
Max. steering angle |
550 |
6 |
Tire type |
4WD fore tire12-16.5NHS-12PR |
Rear tire 19.5L-24R4-12PR |
Working Device Hydraulic System |
1 |
Model of oil pump |
JHP2063C |
2 |
System pressure |
230(kgf/cm2) |
3 |
Model of priority valve |
ZL20.3S4C-00,WJ20.7SC3-00 |
Steering System |
1 |
Type |
Fore wheel Steering |
2 |
Model of steering pump |
JHP2063C |
3 |
Model of steering gear |
BZZ5-E160B+FKB-3022 |
4 |
System pressure |
140(kgf/cm2) |
Oil Capacity |
1 |
Fuel(diesel) |
151(L) |
2 |
Engine lubricating oil |
11(L) |
3 |
Oil for converter and gear box |
18.5(L) |
4 |
Oil for hydraulic system |
110(L) |
5 |
Oil for driving axles(F/R) |
7.6+17(L) |
We will guarantee that your request will be handled quickly and appropriately within 24 hrs.
The most competitive price in the logistics cost to save your cost.
Welcome to contact with us at any time.
Wuhan Fusen Machinery Co.,Ltd
Add: 1004, Longyue Bld, Guanggu 1st Road,Wuhan,China 430000
Website: fusenmach.en.made-in-china.com